Product Information
The Electric Booster Pump can be used for: * Booster for car cooling/heating systems including 4WD and recreational vehicles * Efficient cooling of go-kart engines * Additional cooling for water-cooled motor cycle engines * Heating, Cooling and water pumping in caravans and motor homes * Boats and other marine applications * Solar heating and irrigation The EBP is ideal for boosting the heating and/or cooling system... Vehicle Cabin Heating... The EBP reduces warm up time and increases hot water flow directly from the cylinder head to the heater core – giving you a faster warm-up and increasing available heat to the vehicle cabin, even when engine has been shut off. ...or Efficient Cooling The EBP helps cooling by increasing water circulation around the cylinder head. To prevent hot spots within the cylinder head, the pump can be wired to the ignition or connected to a timer (not supplied in kit), so that it can run-on after engine shut-down to prevent heat build-up. Technical Specifications Motor: 12V Brushless Operating Voltage: 9V DC to 15V DC Maximum Current: 1.3A Pump Design: Recirculating* Centrifugal Drive: Magnetic - no seals Operating Temperature: -40°C to +120°C (-10°F to +250°F Burst Pressure: 250 KPa (36 psi) Flow Rate: 15 L/min (4 gal/min) at 10 kpa Weight: 245g (0.54lbs) Warranty ¹ ¹ Davies, Craig warrant that for a period of two (2) years or 2000 hours operation (whichever is lesser) from the date of purchase, we shall carry out, free of cost, any repairs that are reasonably necessary to correct any fault in the operation of your Electric Water Pump or Controller provided that such a fault is directly attributable to a defect in the workmanship or materials used in the manufacture of the part(s) and is not due to installation other than described in the instructions. Labour and consequential costs are excluded. Packing Contents
Be the first to review this product!
Price: AUD $ 207.95
