Product Information

The Ezy-FLASH Pro is the newest and best way to “Flash” a modified tune into your vehicle's ECU. This handheld plug-in system has the capacity to store multiple programs, including the original factory program.

Live data display, high speed logging as well as trouble code reading and clearing are all features of the Ezy-FLASH Pro. Plus the user can also completely un-install the Ezy-FLASH Pro and return the original tune the the vehicle's ECU at any time, as often as needed.

Product includes Ezy-FLASH Pro, programming cables, Quick Start Guide, USB cable, Tune Manager software, User Manual and Warranty.

ChipTorque offer performance tune sets for all Ezy-FLASH Pro models to suit standard and modified vehicles. Often tune sets are provided pre-installed in the Ezy-FLASH Pro for mail order supply and installation by the vehicle owner or at your local automotive shop or dyno tuner. Tune sets are setup for the specific vehicle make, model, transmission type and aftermarket enhancements.

ChipTorque's tune set for each vehicle normally comprises of the following tune variations:

• Stock / Base - Standard Subaru tune
  
• Anti-theft - This is a security tune that will not allow your engine to start. This is a great option to use when parking your vehicle long term. Reflash to any other tune using your Ezy-FLASH unit to get your vehicle to start and run again.
  
• Valet - This is a limited, reduced power tune which will usually have either a 50% throttle limit or 3,500rpm rev limit as well as a 115km/hr speed limiter. This is handy for instances where you are leaving your vehicle in someone else's hands. They'll be able to operate your vehicle in valet mode, without being able to give it any stick.
  
• 95 Octane fuel performance - Performance tune setup for use with 95RON fuel.
  
• 98 Octane fuel low boost performance - Lower boost performance tune normally set at the factory boost level or slightly higher and suitable for use with 98RON fuel.
  
• 98 Octane fuel high boost performance - Peak performance tune setup at an optimal boost level for your vehicle's level of modification and suitable for use with 98RON fuel.
  

• WRX/STi MY01-05 (Throttle Cable control)
  
• WRX/STi/FXT/LGT MY04-07 (Drive By Wire, serial reflashing)
  
• WRX/STi/FXT/LGT MY08-10 (Drive By Wire, CAN reflashing)
  

The year model overlaps are a guide only, since this varies between sales regions.

Before the Ezy-FLASH Pro can be used on vehicles with a different ECU style, a new license must be installed. Contact ChipTorque for information on purchasing additional licenses if required.

Tune Manager is a software package that accompanies Ezy-FLASH Pro.  This allows the user to perform functions such as setting high speed log parameters, viewing high speed data logs, performing firmware updates and creating or adding tune sets to the Ezy-FLASH.

Tune Manager versions are specific to the Ezy-FLASH Pro model and are all downloadable from our website. This software package enables the user to setup log parameters, download and view logged data, perform Ezy-FLASHPro updates including firmware updates and add Tune sets. Tune Manager Pro Licenced tuning software is coming very soon to enable dyno tuners to upload their own dyno tunes into the Ezy-FLASH Pro product. Tune Manager is also compatible with existing ROM editing software, so if you chose to make your own ROM edits you can group them and upload into the Ezy-FLASH Pro using Tune Manager. The benefits of providing Tunes through Ezy-FLASH Pro mean you can retain the original tune, select multiple tunes and for dyno tuners this method protects their Intellectual Property through Tune Manager and additional optional password protection.

About Performance Metrics
Performance Metrics is the newest feature added to the Ezy-FLASH Pro. This uses the vehicle speed reading over OBDII to estimate several metrics, including:
•60’, 100’, 330’, 1000’ ft times and speeds
•1/8 mile, ¼ mile times and speeds
•0-50km p/hr, 0-60 mls p/hr, and 0-100km p/hr times and distances

Using this feature is as simple as connecting the Ezy-FLASH Pro to your vehicle with the OBDII cable and selecting menu option 4. The Ezy-FLASH Pro will begin recording the performance metrics data as soon as it registers vehicle speed and this can be reviewed on the Ezy-FLASH LCD screen with the option to save the data for review with Tune Manager software.

All existing Ezy-FLASH Pro users can add this feature by performing a Firmware update using Tune Manager. Please note that the Ezy-FLASH Pro Main Menu items 4,5,6 have been shuffled down to 5,6,7 to make room for the new Performance Main Menu item (4).

Important Disclaimer:
1. Never view or operate the Ezy-FLASH while the vehicle is in motion
2. Accuracy is not guaranteed. Measurement relies solely on the vehicle speed parameter read from the ECU. On some ECUs this parameter updates fairly slowly reducing the accuracy of the performance metrics measurements.

For mail order Ezy-FLASH Pro or Tune set supply, we would require the following information:
Vehicle make / model / transmission type / modification details

For email supply of a Tune set for an existing Ezy-FLASH Pro, provide the Ezy-FLASH Pro serial number.
Optional information would be:
Initial ROM (read from the vehicle and emailed through to ChipTorque using the Ezy-FLASH Pro and Tune Manager software)
Ezy-FLASH Pro data log
Dyno graph including AFR.

Application List
* Subaru Impreza WRX STi MY06-07 2.5L Turbo
* Subaru Impreza WRX MY06-07 2.5L Turbo
* Subaru Impreza WRX STi MY03-05 2.0L Turbo
* Subaru Impreza WRX MY03-05 2.0L Turbo

Be the first to review this product!

Price: AUD $ 1099.00

• Tell a Friend
• Write review / comment