Additional Product Images
Product Information
The unique REV LIMITER from Power Builder Bee Racing is a device where a driver can use to prevent a vehicle's engine from being over rev. All parameter adjustments on this device can be made on the fly from the driver's seat. This REV LIMITER is achieved by cutting off the ignition at a preset RPM limit, and by re-routing a fuel dump. An aural feed back of back fire popping sound from the exhaust muffler is the result followed by a fantastic visual of fire coming out from the exhaust muffler tip (catalytic converter may need to be removed). This aural & visual feed back are very similar to those experienced in the fully race-tuned race cars. R E D IGN 12V - Please refer to the wiring diagram supplied in the installation manual, and connect it to the designated vehicle's ECU. BLACK EARTH - Connect this wire to the vehicle's chassis' earth/ground contact, or the the vehicle's battery earth/ground terminal. YELLOW This wire is for the RPM signal. Please refer to the wiring diagram supplied in the installation manual, and connect it to the designated vehicle's ECU. GREEN This wire is for the ignition signal. Please refer to the wiring diagram supplied in the installation manual, and connect it to the designated vehicle's ECU. WHITE This wire is for the side brake switch signal. REV-1 works without connecting it.
Setup & Configuration REV-1: To set up standard RPM. REV-2: The white wire connection set up the RPM readings that corresponds to the side brake switch signal. It works using an external switch. It switches off the engine by inputting a negative signal. GAIN: Controls the engine RPM cut off setting. For example, o is off, and 1 ~ F is the adjustment range. The standard initial setting is 6.
Be the first to review this product!
Price: AUD $ 550.90 AUD $ 488.47
