Street Tuned

ChipTorque - XEDE - 795.00 AUD

The XEDE Processor is an interceptor style Engine Management System. It generates changes in fueling and ignition timing by changing the factory ECU’s load and crank reference input signals to improve the factory tune, specifically to suit an aftermarket exhaust, engine modification or supercharger.

It has the additional functions of electronic boost control and optional dual maps to deliver individual tunes which can be changed at the flick of a switch while driving, e.g. High/Low boost or Power/Economy programs. Two stage intercooler water spray control or any on/off or PWM function including injector drive for an additional injector can be incorporated and controlled using the XEDE Processor.
How the XEDE Processor works
The XEDE Processor integrates with an existing (usually factory) Engine Management System. The operation of the XEDE is to modify the signals (Voltage or Frequency and Crankshaft Reference signals) before the main PCM/ECU sees the signals. By changing the values of these signals, the resultant outputs from the PCM will be changed. If, for example, we effectively reduce the voltage that the PCM sees on the MAP sensor wire at Full Load, the PCM will see a signal that equates to less load. Using this modified input signal, the PCM will open the injectors for less time as it expects the engine is under less load and therefore requires less fuel, thus leaning out the mixtures. Moving the crankshaft reference signal will move the ignition timing (timing advance).

Technical details

Support for hall and reluctor type crank and/or cam timing signals
0.1 degree accuracy on timing adjustments
Support for analogue or frequency MAF and MAP/load signals
0.1% fullscale accuracy on MAF, MAP and TPS adjustments
Two unique tuning map banks that allow optional setup for dual map operation
Internal Storage space for up to 12 tuning maps
Connect your PC to the XEDE Processor using 9 pin DB9 serial cable and free XMap software
Up to 400 adjustment points per tuning map
User configurable load and RPM axes, input and output variables, adjustment range, and math function for each tuning map to making tuning fast and accurate.
Minimum 100rpm breakpoints and 1% load point adjustability
Two high current outputs for boost control, water spray or auxiliary injector, etc.
Unit has a fully sealed, rugged and lightweight housing
User configurable data logging of XEDE signals using XMap (requires PC connection to XEDE during logging)
Live data display through XMap
Password protection for map data stored in the XEDE Processor using XMap

Rear Spoiler/Wing - Subaru Impreza WRX/STi GRB (Carbon Fiber) - 389.00 AUD

Application List
* Subaru Impreza WRX/STi GRB (08+)

ATI - Gauge Pod - Mitsubishi Lancer Evolution X - 229.00 AUD

This ezPod is centered and sits on the center dash, above the radio cluster. It holds 3 60mm gauges and is color and texture treated to match the interior. It uses double sided tape to secure into place.

Application List
* Mitsubishi Lancer Evolution X

NGK Laser Platinum Spark Plug - PFR6B - 20.00 AUD

Heat range - 6

Laser Platinum® spark plugs provide high ignitability and longer service life. Dual platinum surfaces ensure slow wear rate providing stable idle, superior anti fouling, improved fuel efficiency and lower emissions.

    * Laser welded Platinum center electrode tip
    * Platinum disc welded to backside of ground electrode provides long life
    * Trivalent Metal Plating provides superior anti-corrosion and anti-seizing properties
    * Faster starts and quicker acceleration
    * Better fuel economy and lower emissions
    * Best Platinum spark plug available
    * Original Equipment Manufacturer approved design

Tech Tip: These plugs do not come pre-gapped. We recommend purchasing the spark plug gapper tool.

Price advertised is for 1 only.

Application List
* Subaru Forester GT Turbo SF5 - EJ20
* Subaru Impreza WRX GC8/GDA/GDB - EJ20

Always double check if this plug will fit your car. Click here to search the listing.

NGK Laser Platinum Spark Plug - ILFR7H - 20.00 AUD

Heat range - 7

Laser Platinum® spark plugs provide high ignitability and longer service life. Dual platinum surfaces ensure slow wear rate providing stable idle, superior anti fouling, improved fuel efficiency and lower emissions.

    * Laser welded Platinum center electrode tip
    * Platinum disc welded to backside of ground electrode provides long life
    * Trivalent Metal Plating provides superior anti-corrosion and anti-seizing properties
    * Faster starts and quicker acceleration
    * Better fuel economy and lower emissions
    * Best Platinum spark plug available
    * Original Equipment Manufacturer approved design

Tech Tip: These plugs do not come pre-gapped. We recommend purchasing the spark plug gapper tool.

Price advertised is for 1 only.

Application List
* Mitsubishi Lancer Evolution IX/9

Always double check if this plug will fit your car. Click here to search the listing.

NGK Iridium Spark Plug - BKR5EIX-11 - 22.00 AUD

Gap - 1.1mm
Heat range - 5

Iridium IX Spark Plugs are the most technologically advanced high performance plugs available.

Featuring a 0.6 mm iridium center electrode tip, they offer superior ignitability without sacrificing durability. The tapered ground electrode increases flame kernel expansion, while the superior heat range design is ideally suited to the demands of high performance environments.

Specially designed to meet the needs of serious enthusiasts, Iridium IX Spark Plugs offer outstanding acceleration, high fuel efficiency and long life. When you demand the most from your engine, rely on the proven performance of NGK Iridium IX Spark Plugs.

Price advertised is for 1 only.

Application List
* Nissan Skyline GTS-T R33 - RB25DET
* Nissan Skyline GTS-T R34 - RB25DET

Always double check if this plug will fit your car. Click here to search the listing.

NGK Iridium Spark Plug - BCPR6EIX-11 - 22.00 AUD

Gap - 1.1mm
Heat range - 6

Iridium IX Spark Plugs are the most technologically advanced high performance plugs available.

Featuring a 0.6 mm iridium center electrode tip, they offer superior ignitability without sacrificing durability. The tapered ground electrode increases flame kernel expansion, while the superior heat range design is ideally suited to the demands of high performance environments.

Specially designed to meet the needs of serious enthusiasts, Iridium IX Spark Plugs offer outstanding acceleration, high fuel efficiency and long life. When you demand the most from your engine, rely on the proven performance of NGK Iridium IX Spark Plugs.

Price advertised is for 1 only.

Application List
* Nissan Skyline - RB30DET or RB30 Turbo
* Nissan Skyline GTS R31/R32 - RB20DET
* Nissan Skyline GTR R33/R34 - RB26DETT
* Nissan 180SX S13 - CA18DE/CA18DET
* Nissan Silvia S13 - CA18DE/CA18DET

Always double check if this plug will fit your car. Click here to search the listing.

NGK Iridium Spark Plug - BKR6EIX - 22.00 AUD

Heat range - 6

Iridium IX Spark Plugs are the most technologically advanced high performance plugs available.

Featuring a 0.6 mm iridium center electrode tip, they offer superior ignitability without sacrificing durability. The tapered ground electrode increases flame kernel expansion, while the superior heat range design is ideally suited to the demands of high performance environments.

Specially designed to meet the needs of serious enthusiasts, Iridium IX Spark Plugs offer outstanding acceleration, high fuel efficiency and long life. When you demand the most from your engine, rely on the proven performance of NGK Iridium IX Spark Plugs.

Tech Tip: These plugs do not come pre-gapped. We recommend purchasing the spark plug gapper tool.

Price advertised is for 1 only.

Application List
* Toyota Supra 1JZ-GTE 3L Inline
* Nissan 200SX S14/S14a - SR20DET
* Nissan Silvia S15 - SR20DET

Always double check if this plug will fit your car. Click here to search the listing.

NGK Iridium Spark Plug - BPR7EIX - 22.00 AUD

Heat range - 8

Iridium IX Spark Plugs are the most technologically advanced high performance plugs available.

Featuring a 0.6 mm iridium center electrode tip, they offer superior ignitability without sacrificing durability. The tapered ground electrode increases flame kernel expansion, while the superior heat range design is ideally suited to the demands of high performance environments.

Specially designed to meet the needs of serious enthusiasts, Iridium IX Spark Plugs offer outstanding acceleration, high fuel efficiency and long life. When you demand the most from your engine, rely on the proven performance of NGK Iridium IX Spark Plugs.

Tech Tip: These plugs do not come pre-gapped. We recommend purchasing the spark plug gapper tool.

Price advertised is for 1 only.

Application List
* Mitsubishi Lancer Evolution VIII 03-05 GSR, MR, RS

Always double check if this plug will fit your car. Click here to search the listing.

NGK Iridium Spark Plug - BKR8EIX-11 - 20.00 AUD

Gap - 1.1mm
Heat range - 8

Iridium IX Spark Plugs are the most technologically advanced high performance plugs available.

Featuring a 0.6 mm iridium center electrode tip, they offer superior ignitability without sacrificing durability. The tapered ground electrode increases flame kernel expansion, while the superior heat range design is ideally suited to the demands of high performance environments.

Specially designed to meet the needs of serious enthusiasts, Iridium IX Spark Plugs offer outstanding acceleration, high fuel efficiency and long life. When you demand the most from your engine, rely on the proven performance of NGK Iridium IX Spark Plugs.

Price advertised is for 1 only.

Always double check if this plug will fit your car. Click here to search the listing.

NGK Iridium Spark Plug - BKR7EIX-11 - 18.50 AUD

Gap - 1.1mm
Heat range - 7

Iridium IX Spark Plugs are the most technologically advanced high performance plugs available.

Featuring a 0.6 mm iridium center electrode tip, they offer superior ignitability without sacrificing durability. The tapered ground electrode increases flame kernel expansion, while the superior heat range design is ideally suited to the demands of high performance environments.

Specially designed to meet the needs of serious enthusiasts, Iridium IX Spark Plugs offer outstanding acceleration, high fuel efficiency and long life. When you demand the most from your engine, rely on the proven performance of NGK Iridium IX Spark Plugs.

If a colder and smaller gap spark plug is required, please select the BKR8EIX-11.

Price advertised is for 1 only.

Always double check if this plug will fit your car. Click here to search the listing.

NGK Iridium Spark Plug - BKR6EIX-11 - 18.50 AUD

Gap - 1.1mm
Heat range - 6

Iridium IX Spark Plugs are the most technologically advanced high performance plugs available.

Featuring a 0.6 mm iridium center electrode tip, they offer superior ignitability without sacrificing durability. The tapered ground electrode increases flame kernel expansion, while the superior heat range design is ideally suited to the demands of high performance environments.

Specially designed to meet the needs of serious enthusiasts, Iridium IX Spark Plugs offer outstanding acceleration, high fuel efficiency and long life. When you demand the most from your engine, rely on the proven performance of NGK Iridium IX Spark Plugs.

If a colder and smaller gap spark plug is required, please select the BKR7EIX-11.

Price advertised is for 1 only.

Application List
* Nissan Skyline GTS-T R33 - RB25DET
* Nissan Skyline GTS-T R34 - RB25DET
* Nissan 300ZX - VG30DETT
* Nissan 300ZX - VG30DE

Always double check if this plug will fit your car. Click here to search the listing.

Genuine Toyota - Water Pump - 2JZ-GTE - 330.00 AUD

Genuine Toyota Water Pump

Application List
* Toyota Supra (2JZ-GTE)
* Toyota Aristo (2JZ-GTE)
* 2JZ-GTE (All vehicles fitted with this engine)

Product image shown above is only to be used as a guide.

GReddy TRUST - Magnetic Sump Bolt - Subaru - 39.00 AUD

The GReddy magnetic sump bolt prevents costly engine damage through metal particles floating throughout the oil, instead capturing it at the base of the bolt.

    * Neodymium magnet with the highest magnetic force possible
    * Coated with nickel for imroved durability
    * Prevents any metal particles floating around the energy
    * Improved engine longetivity and reliability in high stress environments

Includes a heavy duty crusher washer.

The before and after results, travelling 200km. In this very little time, its collected very small metal shavings.

Bolt size is M20xP1.5

Application List
* Subaru

GReddy TRUST - Magnetic Sump Bolt - Mitsubishi/Honda/Mazda/Suzuki - 39.00 AUD

GReddy TRUST - Magnetic Sump Bolt - Toyota/Nissan/Daihatsu - 39.00 AUD

Splitfire - Super Direct DI Ignition System - Nissan RB20DE/RB20DET - Old Type (Option Harness) - 140.00 AUD

Optional Harness available for older RB20DE/RB20DET vehicles.

Application List
* Nissan RB20DE/RB20DET

Splitfire - Super Direct DI Ignition System - Nissan 300ZX/Fairlady - 699.00 AUD

The SplitFire Super Direct Ignition System is designed exclusively for the Japanese T high performance engine. This system replaces the original equipment coil pack and ignition wires with a direct ignition coil on plug system. The increased ignition performance found with the SplitFire Super Direct Ignition System is a must for all racing and performance enthusiasts.

* Increases horsepower at the top end of the RPM band
* Ensures and maintains maximum energy supplied to the spark plugs
* Reduces incomplete combustion caused by misfire
* Eliminates RFI (radio frequency interference) by eliminating the need for a wire set
* Easy installation designed to fit the high performance engines

Please note..
The difference between the RB25DET series 1 and series 2 Splitfire coil packs are the igniters. The series 1 have separate igniters, where the series 2 are built in. You should be able to tell by looking at the existing coil packs. Alternatively you could look up the engine number with Nissan.

Application List
* Nissan Fairlady - CZ32/GCZ32 - VG30DE/VG30DETT

Please specify what vehicle you have below.

Splitfire - Super Direct DI Ignition System - Nissan Skyline/Silvia - 650.00 AUD

The SplitFire Super Direct Ignition System is designed exclusively for the Japanese T high performance engine. This system replaces the original equipment coil pack and ignition wires with a direct ignition coil on plug system. The increased ignition performance found with the SplitFire Super Direct Ignition System is a must for all racing and performance enthusiasts.

* Increases horsepower at the top end of the RPM band
* Ensures and maintains maximum energy supplied to the spark plugs
* Reduces incomplete combustion caused by misfire
* Eliminates RFI (radio frequency interference) by eliminating the need for a wire set
* Easy installation designed to fit the high performance engines

Please note..
The difference between the RB25DET series 1 and series 2 Splitfire coil packs are the igniters. The series 1 have separate igniters, where the series 2 are built in. You should be able to tell by looking at the existing coil packs. Alternatively you could look up the engine number with Nissan.

If you need a harness for your RB20DE/RB20DET (Old Type), click here.

Application List
* Nissan Skyline - BNR32/HCR32/BCNR33/ECR33 Series 1
* Nissan Skyline - BNR34/ECR33 Series 2 1/95-5/98
* Nissan Skyline - ER34/EN34 - RB25DE(T)
* Nissan Silvia - PS13/RPS13/S14 - SR20DET
* Nissan Silvia - S15 - SR20DET

Please specify what vehicle you have below.

Genuine Nissan - Engine Mount - Nissan Pulsar N15 (Front Torque Mount) - 140.00 AUD

Place your worn engine torque mount with this brand new item.

Application List
* Nissan Pulsar N15

Genuine Nissan - Engine Mount - Nissan Pulsar N15 (Transmission) - 150.00 AUD

Place your worn transmission mount with this brand new item.

Application List
* Nissan Pulsar N15

Genuine Nissan - Engine Mount - Nissan Pulsar N15 (Engine) - 150.00 AUD

Place your worn engine mount with this brand new item.

Application List
* Nissan Pulsar N15

Genuine Nissan - Engine Mount - Nissan Micra K11 (Front Torque Mount) - 140.00 AUD

Place your worn engine mount with this brand new item.

Application List
* Nissan Micra K11

Genuine Nissan - Engine Mount - Nissan Micra K11 (Transmission) - 150.00 AUD

Place your worn transmission mount with this brand new item.

Application List
* Nissan Micra K11

Genuine Nissan - Engine Mount - Nissan Micra K11 (Engine) - 150.00 AUD

Place your worn engine mount with this brand new item.

Application List
* Nissan Micra K11

Vorsteiner - Rear Diffuser - Ferrari F430 - 3,200.00 AUD

The Vorsteiner F430 Carbon Fiber Rear Diffuser is over 30% lighter than the factory diffuser while maintaining functionality.

Application List
* Ferrari F430

Davies, Craig - EWP 115L (12v) & Digital Controller - Combo Pack - 399.00 AUD

The EWP115 Electric Water Pump - univresal fit, do-it-yourself, easy to install water pump designed to replace or compliment your existing belt-driven mechanical water pump.

By removing the parasitic power losses of a belt-driven water pump the EWP can provide up to 10kW of extra power, increased torque, increased cooling capacity, eliminating heat soak and provide better engine temperature control.

Dimensions: Height 84mm, Width 128mm, Inlet Opening 38mm

Appologies for the quality of the above picture, its all we have at the moment.

Warranty
¹

¹ Davies, Craig warrant that for a period of two (2) years or 2000 hours operation (whichever is lesser) from the date of purchase, we shall carry out, free of cost, any repairs that are reasonably necessary to correct any fault in the operation of your Electric Water Pump or Controller provided that such a fault is directly attributable to a defect in the workmanship or materials used in the manufacture of the part(s) and is not due to installation other than described in the instructions. Labour and consequential costs are excluded.

Davies, Craig - Electric Water Pump 115L (12v) - 249.00 AUD

The EWP115 Electric Water Pump - univresal fit, do-it-yourself, easy to install water pump designed to replace or compliment your existing belt-driven mechanical water pump.

SuperPro - Rear Camber Adjustment Kit - Honda Accord Euro CL7/CL9 - 329.00 AUD

Kit Contents
2 x #2589K “Control Arm Upper/ Lower – Inner, Eccentric” = 4 x #2588 Bushing, 4 x #2589T Tube
1 x #2591K “Toe Control Arm – Outer Bushing, Eccentric” = 2 x #2590 Bushing, 1 x #2591 Tube

Note:- #2589T & #2591T Tubes have holes offset by 4mm

Application List
* Honda Accord Euro CL9
* Honda Accord EuroR CL7

Honda Accord EuroR CL7 - Pedal Set (Automatic) - 350.00 AUD

JDM your Honda Accord Euro CL9 with this pedal set!

You'll get..
1 x Accelerator Pedal Assembly with Cover
1 x Brake Pedal Cover
1 x Foot Rest Cover

Application List
* Honda Accord Euro CL9
* Honda Accord EuroR CL7

Honda Accord EuroR CL7 - Pedal Set (Manual) - 350.00 AUD

JDM your Honda Accord Euro CL9 with this pedal set!

You'll get..
1 x Accelerator Pedal Assembly with Cover
1 x Brake Pedal Cover
1 x Clutch Pedal Cover
1 x Foot Rest Cover

Application List
* Honda Accord Euro CL9
* Honda Accord EuroR CL7

Honda Accord 'euroR' badge - 69.00 AUD

JDM euroR badge for rear trunk

Genuine from Honda.

Application List
* Honda Accord EuroR CL7
* Honda Accord Euro CL9

SILVERS - Brake System (4-POT) - Front Package - 1,399.00 AUD

Based on Racing Designs with Proven Track Performance and Suitable for Street.

Caliper Body
Caliper body is forged out of T2024 aluminum, machined from blank
billets.

Brake Pads
Brake pads are made from NAO ceramics (Non Asbestos Organic). Rated at 0~650 degree. Proven to be high friction and low noise.

Heat Shield
All calipers contain a special designed heat shield insulator. These protect against heat transfer from brake pads into the caliper body and piston seals.

Piston
Piston Size of 38/42mm, made of T6061 T6 hard anodized aluminum which is selected for its low heat transfer properties and high resistance to corrosion.

Seals
Only use special Japan made high temperature seals.

Rotor
Constructed from premium grade FC28 carbon iron. Rated at 925 degree.
302/330mm the diameter x 28mm thickness.
All rotors are slotted.

Weight
6.5kg in weight (2piece) / 8.1kg in weight (1piece).

Heat Control
Slotted direction veins help disperse heat to protect the rotor
Full floating hub allows the rotor to expand and contract freely that helps prevent the rotor from warping and cranking. (2piece rotor)

303 x 28mm - Requires minimum 16” wheel - 1piece*
330 x 28mm - Requires minimum 17” wheel - 1piece*
330 x 28mm - Requires minimum 17” wheel - 2piece*

* The primary image shown above is the 1piece model, and the image shown in the gallery with the black background is the 2piece model.

Application List

Click here for the full application list.

Keywords
HONDA
CIVIC 5 (EG) Front
CIVIC 6 (EK) Front
CIVIC 7 (EP3) Front
INTEGRA (DC2) Front
INTEGRA (DC5) Front
ACCORD (CB7/CD5/7) K7 Front
ACCORD (CF) K9 Front
ACCORD (CL7) K11 Front
FIT/JAZZ (GD1/3) Front
CRV Front
S2000 (AP1/2) Front
CIVIC 8 (FD2) Front
FIT/JAZZ (GE6/8) Front
CRV Front
ODYSSEY Front

HYUNDAI
COUPE Front
COUPE Front
TUCSON Front
SONATA Front
SATAFE Front

MITSUBISHI
LANCER (CJ4A) Front
LANCER (CS7A) Front
GALANT (EC1A) Front
EVO 5/6 (CN9A) Front
EVO 7/8/9 (CT9A) Front
ECLIPSE 1 Front
ECLIPSE 2 Front
EVO X (CZ4A) Front
COLT Plus (LTGF) Front
GRUNDER Front
SAVRIN Front
OUTLANDER Front

MAZDA
RX7 (FD3S) Front
RX8 (SE3P) Front
323 PORTAGE (BJ5W) Front
PREMACY (CP8W) Front
MAZDA 3/AXELA (BK3P) Front
MAZDA 6 (GGES) Front
MAZDA 5 Front
MAZDA 2 (DE5FS) Front
TRIBUTE Front

BMW
3 Series (E36) Front
3 Series (E46) Front
3 Series (E30) Front
5 Series (E39) Front
MINI COOPER S (R53) Front
5 Series (E34) Front
5 Series (E60) Front
Z3 Front
Z4 Front
1 Series (E87) Front

NISSAN
SENTRA 180 (N16) Front
SENTRA 341 (N16) Front
MARCH (K11) Front
SILVIA 180SX (S13) Front
SILVIA 240SX (S14/15) Front
SKYLINE GTR (R32) Front
SKYLINE GTR (R33/34) Front
350Z (Z33) Front
300ZX (Z32) Front
CEFIRO (A32) Front
CEFIRO (A33) Front
TEANA (J31) Front
TIIDA (C11) Front
X-TRIL Front
BLUEBIRD Front
G35/M35 Front
FX35/45 Front

FORD
TIERRA Front
MAV Front
FOCUS Front
MONDEO Front
METROSTAR Front
MONDEO Front
ESCAPE Front

SUZUKI
SOLIO (MA34S) Front
SWIFT (ZC31S) Front
SX4 Front
LIANA Front

SUBARU
IMPREZA (GC8) Front
IMPREZA (GDB) Front
LEGACY (BE5) Front
IMPREZA (GDB-F) Front
FORESTER Front

VW
GOLF 4/BORA Front
GOLF 5 Front
BETTLE Front
PASSAT Front
PASSAT Front
TOURAEG Front
T4 Front

TOYOTA
ALTIS (ZZE122) Front
WISH (ZNE10G) Front
VIOS/VITZ (NCP10/13) Front
CAMRY (MCV20) Front
CAMRY (MCV30) Front
CAMRY (ACV40) Front
CORONA PREMIO Front
YARIS (NCP91) Front
GS300/ARISTO (JZS160) Front
IS200/ALTEZZA (SXE10) Front
IS250 (GSE20) Front
GS350 Front
SC430 Front
ES350 Front
RX330/350 Front
PREVIA Front
CELICA (ST202) Front
CROWN Front
INNOVA Front
TACOMA Front

AUDI
A4 (B5) Front
A4 (B6) Front
A4 (B7) Front
S4 (B5) Front
A6 Front
S6 Front
A3 Front
TT Front
Q7 Front

ALFA
156 Front
164 Front
SPIDER Front
GTV Front

CHRYSLER
300C Front
JEEP Front

CITROEN
SAXO Front
C2 Front
C3 Front
C4 Front

OPEL
CORSA Front
ASTRA G Front
ASTRA OPC Front
TIGRA Front

PEUGEOT
206 Front
306 Front
307 Front

RENAULT
CLIO Front
MEGANE Front
SCENIC Front

SAAB
900 Front
9-3 Front
9-3 Front
9-5 Front
9000 Front

VOLVO
S60 Front
S70/C70 Front
S80 Front
XC90 Front

SILVERS - Engine Torque Damper - 159.00 AUD

* Reduce strain on engine mounts, extend engine mounts durability
* Minimize gear shift miss during high RPM
* Minimize unnecessary torque lost caused by gear shift vibration
* Featuring an ultra-light carbon shaft and a reinforced hard rubber joint
* T6068 Space-craft Aluminium Alloy material

"We know you'll happy with your purchase because we've tested this item ourself" - Street Tuned Staff

HONDA
ITEM NO	MODEL	SHAFT SIZE	YEAR
EDH101	CIVIC 5(EG)	S	1992~1995
EDH102	CIVIC 6(EK)	S	1996~2000
EDH103	CIVIC 5(EG) U.S Model	S	1992~1995
EDH104	INTEGRA(DC2)	S	1994~2000
EDH105	INTEGRA(DC5)	S	2001~
EDH109	FIT/JAZZ(GD1/3)	S	2002~
EDH111	S2000(AP1/2)	S	2000~
MITSUBISHI
EDM101	LANCER (CN9A)	M	1996~2000
EDM102	LANCER (CT9A)	M	2001~
EDM103	GALANT(EC1A)	M	1998~
EDM105	EVO 8/9 U.S model	M	2001~2007
MAZDA
EDM201	RX7(FD3S)	XL	1993~2003
NISSAN
EDN105	SILVIA 180SX(S13)	L	1989~1994
EDN106	SILVIA 240SX(S14/15)	L	1995~1999
EDN107	SKYLINE GTR(R32)	XL	1989~1994
EDN108	SKYLINE GTR(R33/R34)	XL	1995~2004
SUZUKI
EDS101	SOLIO(MA34S) T.W Model	M	2000~
TOYOTA
EDT101	IS200 ALTEZZA(SXE10)	L	2000~2005

SILVERS - NEOMAX Suspension System - 1,199.00 AUD

NEOMAX Silver's Suspension System Kit was designed for drivers seeking improved handling on the street and at the track. It allows for a better ride at lowered ride heights, and increased grip at the track.

Proven performance. Extensive testing has gone into the production of these coilvoers by the team over at SILVERS.

Features
* 24 levels of dampening adjustability can be set to any preference
* 44mm linear characteristic internal piston
* Mono-tube shock design
* Italian IP F.A 5W made very high viscosity index guarantees efficient shock-absorbing action at any ambient temperature
* Lower bracket height adjustability prevents the needs to adjust the spring perch offering the max shock-absorbing travel
* The cold-bent spring (SAE9254) is designed to optimize the balance between performance and comfort.

Pillowball top mounts are optional.

Each coilover kit includes the following:
* 4 x metal top mounts*
* 4 x springs
* 4 x shocks
* 1 x spanner wrench
* 2 x stickers

* If the optional Pillowball top mounts are purchased with these coilovers, the rubber top mounts will not be included.

Application List
Click here to view the full application list & spring rates.

Frequently Asked Questions
Q: Does Silver's make a set for my car?
A: Click on the application list above, if your vehicle model & year is listed, then your in luck.

Q: How do I know if the pillowball top mount is available for my vehicle?
A: Click on the application list above, and next to each model, it will indicate either Y (Yes) or N (No), I'm sure you get the idea..

Q: How can I adjust the dampness of the suspension?
A: A total of 4 suspesion units are provided with each kit and on each suspension unit, it has a knob above which has 24 dampening settings.

Q: Does it come with spanners to adjust the height?
A: Yes, 2 of them.

Q: How reliable is this product?
A: Let me put it this way, we've sold over 60 sets, so thats 240 units and only 1 has come back for warranty claims.

Q: Can my mechanic install this for me?
A: Yes. If he doesn't know how to, then I'd be looking for a new mechanic.

Q: How much does it generally cost to have these installed?
A: Roughly $200 to have them installed.

Q: Why are you cheaper than the others?
A: Cheaper overheads means cheaper products.

Q: Are you a dealer of Silver's products?
A: Yes, and we'll prove it.

Q: Is this a fake?
A: No, and we'll prove it. If you've heard otherwise, please notify us, this is a form of defamation

Keywords
CIVIC 5 (EG)
CIVIC 5 (EG) USDM
CIVIC 6 (EK)
CIVIC 7 (EP3)
INTEGRA (DC2)
INTEGRA (DC2) USDM
INTEGRA (DC5)
ACCORD (CB7/CD5/7) K7
ACCORD (CF) K9
ACCORD (CL7) K11
ACCORD (CM)
FIT/JAZZ (GD)
FIT/JAZZ (GD) USDM
S2000 (AP1/2)
CIVIC 8 (FA/FG)
CIVIC 8 Type R (FD2)
CRX (EF)
FIT/JAZZ (GE)
CRV (RD1/2)
ACCORD 09’
LANCER/VIRAGE (CJ4A)
LANCER/VIRAGE (CS7A)
GALANT (EC1A)
LANCER EVO5/6 (CN9A)
LANCER EVO7/8/9 (CT9A)
ECLIPSE 1 (D32/33A)
LANCER EVO X (CZ4A)
LANCER FORTIS EX (CY4A)
LANCER/VIRAGE
COLT Plus (Z27A)
LANCER EVO1/2/3 (CE9A)
RX7 (FD3S)
RX8 (SE3P)
MIATA/MX5 (NA/NB)
323 PORTAGE (BJ5W)
PREMACY (CP8W)
MAZDA 3/AXELA (BK3P)
MAZDA 5
MAZDA 2 (DE5FS)
MIATA/MX5 (NCEC)
3 Series (E36)
3 Series (E46)
3 Series (E90)
M3 (E46)
5 Series (E39)
MINI COOPER S (R53)
5 Series (E60)
7 Series (E38)
1 Series (E87)
C240/320 (W203)
A4 (B5)
A4 (B7/8E)
A3
TT 2WD
156
SENTRA 180 (N16)
SENTRA 341 (N16)
MARCH (AK11)
PRIMERA (P10)
SILVIA 180SX (S13)
SILVIA 240SX (S14/15)
SKYLINE GTR (BNR32)
SKYLINE GTR (BNR33/34)
350Z (Z33)
PRIMERA (P11)
MAXIMA/CEFIRO (A32)
MAXIMA/CEFIRO (A33)
TIIDA (C11)
370Z (Z34)
G35 (V35)
G37 (V36)
TIERRA
MAV
FOCUS
SOLIO (MA34S)
SWIFT (ZC31S)
IMPREZA (GC8)
IMPREZA (GDB)
LEGACY (BE/BH)
IMPREZA (GDB-F)
IMPREZA STI (GRB)
IMPREZA WRX (GH8)
GOLF 3/VENTO
GOLF 4/BORA
GOLF 5 GTI 2.0
GOLF 5 1.6
LUPO (6X/6E)
POLO (9N)
ALTIS (ZZE122)
WISH (ZNE10G)
VIOS/VITZ (NCP10/13)
COROLLA (AE92/101/111)
CORONA EXSIOR (ST191)
CORONA PREMIO (ST210)
SUPRA (JZA80)
YARIS (NCP91)
GS300/ARISTO (JZS161)
IS200/ALTEZZA (SXE10)
IS250/350 (GSE20)
COROLLA 09’
CELICA (ST185)
SC300/400 (JZZ30)
CHASER (JZX100/90)

Genuine Honda - Oil Pan - Honda S2000 - 399.00 AUD

Scratched or cracked oil pan? Spare the headache and repalce it with a Genuine Honda item.

Application List
* Honda S2000 AP1/AP2 (F20C)

SPOON - Reservoir Tank Cover - 39.00 AUD

The Spoon reservoir tank cover prevents any drips of power steering or brake fluid from these reservoirs that can cause paint damage or in the worst of occurrences fire.

The reservoir covers also provide a unique look to your engine bay for that high performance appearance.

Application List
* Honda Civic
* Honda Prelude
* Honda Integra
* Honda Accord
* Honda Jazz
* Honda Odyssey
* Honda CR-V
* Honda Legend
* Honda S2000
* Honda NSX

SPOON - Engine Torque Damper - 255.00 AUD

The Spoon Engine Torque Damper adds to the rigidity of the Spoon Engine Mounts to significant reduce engine vibration during high load conditions. The high quality brackets are manufactured to use existing mounting points so no drilling is necessary into the body work.

Please note Suitable for Right hand Drive Vehicles only.

Application List
* Honda S2000 AP1/2 (50810-AP1-000)
* Honda Accord Euro-R CL7/CL9 (50810-CL7-000)
* Honda Civic EG6 (50810-DC2-000)
* Honda Integra Type-R DC2/DB8 (50810-DC2-000)
* Honda Integra Type-R DC5 - First Series (50810-DC5-000)
* Honda Integra Type-R DC5 - Second Series (50810-DC5-020)
* Honda Civic EK4 (50810-EK9-000)
* Honda Civic Type-R EK9 (50810-EK9-000)
* Honda Civic Type-R EP3 (50810-EP3-000)
* Honda Civic Type-R FD2 (50810-FD2-000)
* Honda Jazz/Fit GD1/3/3MT (50810-GD3-000)

Ralliart Style Front Lip - Mitsubishi Lancer Evolution 9 - 199.00 AUD

It is common to see new sports cars designed with items such as factory under trays and other advanced aerodynamic components to produce 'zero-lift'. Although these components are great at reducing lift, they may not bring the added stability and traction road racers are looking for when taking fast turns.

This front lip goes beyond reducing lift and increases stability & down force at high speeds. Asides from the performance benefits, the Front Air Dam also adds an aggressive yet functional appearance to sports car.

Painted Matte Black.

Autobahn88 - Suction Kit for Mitsubishi Colt Z27A Turbo - 199.00 AUD

Suction Pipe made by Cast Metal

Silicone Hose Specifications
* 4 Layer Polyester
* 5mm Wall Thickness
* Working Temperture:-60 degree to 180 degree
* Hose Burst Pressure Limit Equal to 5Bar
* Ensure the hose working properly in extreme racing environment.

Item Description
* Accept higher pressure than the original
* The temperature change will not affect the shape and
the flow rate.
* Not Easy to break down or harden, more durable than factory components.
* Polished surface prevent the outside temperature
affect the inside
* Made by 2mm Aluminum Alloy, Light weight and
hard
* Styling Outlook

Application List
* Mitsubishi Colt Z27A Turbo

Autobahn88 - Drift Racing Hand Brake Lever - 249.00 AUD

Hydraulic Handbrake necessity for Drift and Rally Car.

Lever can be used in either a normal or Upright Position.

Specialized for Racing Car
Hydraulic Design
Lock or Unlock Latch Design
Two Install Lever Position
Stylish Design

Made from Aluminum Alloy

Application List
* Universal - All applications

Subaru - F Badge Ornament (Pink) - 85.00 AUD

Genuine Subaru OEM product.

Suits
* Subaru Forester

Package Contents
* Clips
* Bracket
* F Ornament (Black)

Aluminium Induction Air Box - Nissan Silvia S15 - 249.00 AUD

Replace your factory air box with this amazing high quality aluminum air box.

Includes a high quality panel air filter to suit this air box.

ZAGE - Turbo Manifold - Nissan SR20DET S13 S14 S15 - 483.53 AUD

Equal length style

Material: SUS304
Pipe Specification: O/D- 42.7 mm, thickness: 2mm
Flange thickness - engine side 15mm / turbo side: 12mm

Suitable for T25/T28 turbo

Hand made.

Application List
* Nissan Silvia S13 - SR20DET
* Nisasn 180SX S13 - SR20DET
* Nissan 200SX S14 - SR20DET
* Nissan Silvia S15 - SR20DET

Process West - Cold Air Intake - Subaru Impreza/Forester WRX/STi/XT - 353.69 AUD

Designed to replace the restrictive factory air intake tract. It is fabricated from lightwieght CNC mandrel bent aluminium tube and has a CNC machined air flow meter mount. It comes complete with a K&N air filter. The unit is painted 2-Pac silver for a flawless finish.

Application List
* Subaru Impreza WRX/STi GDA/GDB (MY97-98)
* Subaru Impreza WRX/STi GDA/GDB (MY99-00)
* Subaru Impreza WRX/STi GDA/GDB (MY01-07)
* Subaru Forester XT (MY04-07)

Please state vehicle details below before adding this item to your basket.

JMF - Intake Pipe - Mitsubishi Lancer Evolution 7-9 - 237.41 AUD

Designed for EVO's running the stock MAS. Made from 3" 6061 aluminum tube. Comes standard with 2 vacuum fittings. Couplers and clamps *NOT* included. If your still running the stock turbo you will need a 2.5" x 3" reducing coupler for the turbo inlet, and a 3" straight coupler for the MAS (we highly recommend using a 3 ply coupler to the MAS over a 4 ply coupler, you will have a hard time stretching the 4 ply coulper). You will also need to supply a small peice of hose to connect the BOV dump to the recirc tube.

Warranty
This item carries a 1 year warranty against any defects.

Video

Application List
* Mitsubishi Lancer Evolution 7
* Mitsubishi Lancer Evolution 8
* Mitsubishi Lancer Evolution 9

JMF - Intake Plenum Manifold - Mitsubishi Lancer Evolution 4-9 (Drag Version) - 1,355.63 AUD

We’ve all heard the saying "Bigger is Better"….that statement couldn’t be more true when it comes to turbocharged cars and intake manifolds. Introducing our aluminum DRAG VERSION sheetmetal intake manifold for the 7/8/9 EVO. This intake manifold is for the hard core racers only! If your running a 35R or larger turbo, continue reading……if your not then now is a good time to hit the browsers BACK button!

These are hand made, TIG welded from high quality 6061 T6 aluminum. The flanges are all CNC machined and surfaced for precise fitment and a leak free seal. The plenum measures in approx. at a whopping 5 liters. Velocity stacks are CNC machined into each plenum bottom to improve airflow by 10-15%. The vacuum ports are placed on the underside of the plenum for a clean professional look. They are available unpolished or with a mirror like polish. Expected gains can be anywhere from 10-45 HP depending upon your setup!

Each manifold comes with a custom made SS dipstick tube. Some modifications to your upper intercooler pipes may be needed as this manifold sits down a lot lower then stock. If using the Accufab and other aftermarket throttle bodies please note that the throttle cable and TPS sensors may need modifying. This manifold will also eliminate your EGR system so if you are not running a stand alone engine management most likely you will receive a CEL due to the eliminated EGR. An ECU flash is in the works to eliminate this error code.

Warranty
This item carries a 1 year warranty against any material defects and a 3 year warranty against any weld defects. Any damage caused by a nitrous explosion or improper installation will void all warranties.

Video

Application List
* Mitsubishi Lancer Evolution 4
* Mitsubishi Lancer Evolution 5
* Mitsubishi Lancer Evolution 6
* Mitsubishi Lancer Evolution 7
* Mitsubishi Lancer Evolution 8
* Mitsubishi Lancer Evolution 9

JMF - Intake Plenum Manifold - Mitsubishi Lancer Evolution 4-9 (Race Version) - 1,161.83 AUD

In tradition of our high quality power proven, yet quite affordable products comes the latest option for Mitsubishi Evolution 7/8/9 intake manifolds. Just as our DSM and SRT-4 manifolds have increased power on many of customer cars, be certain that the same will happen with your Evo and this intake manifold. Introducing our aluminum sheetmetal intake manifold. These are hand made, TIG welded from high quality 6061 T6 aluminum.

The flanges are all CNC machined and surfaced for precise fitment and a leak free seal. Each plenum is press bent to reduce the number of welds which will assure maximum strength under high boost applications. The plenum measures 16" long by 4 1/4" deep, the plenum also features a 1" taper design to even out the airflow, with a runner length of 5 1/4". Velocity stacks are CNC machined into each plenum bottom to improve airflow by 10-15%. The vacuum ports are placed on the underside of the plenum for a clean professional look. They are available unpolished or with a mirror like polish. Each manifold comes with a custom made SS dipstick tube. Some modifications to your upper intercooler pipes may be needed as this manifold sits down a lot lower then stock. If using the Accufab and other aftermarket throttle bodies, please note that the throttle cable and TPS sensors may need modifying. This manifold will also eliminate your EGR system so if you are not running a stand alone engine management most likely you will receive a CEL due to the eliminated EGR. An ECU flash is in the works to eliminate this error code. Expected gains can be anywhere from 10-45 HP depending upon your setup!

Why believe hype when you can see actual dyno results that this manifold works?
A local Evo specialist shop nearby in the tri-state area did some testing on one of their customer cars and we were more than excited when we saw the results. The test vehicle was an ’06 Evo 9 MR, stock bottom end, Turbo Trix Racing 280 cams, 1000cc injectors, Walbro pump, TTR 50 trim kit & IC piping kit, SMC alky kit being ran on all runs and AEM EMS for engine management.

The runs were done back to back, same day—same dyno—same boost (32psi), with only the intake manifold being swapped out. Prior to our intake manifold install, the car was fine tuned to an impressive 494.5hp, 441.28 ft/tq which is extremely rare to see a 50 trim car making such power. With our intake manifold bolted on, the car spun the rollers to an even more impressive 512.39hp and 461.4 ft/tq ! Horsepower was ABOVE the stock intake manifold graph virtually the entire run too, starting at 3500—just see the graph below for yourself. You may think 18 peak hp and 20 ft/tq isn’t really all that much, but also keep in mind that this car was practically maxed out on it’s current setup. At mid-range RPMs the gains were even larger increasing power by 41hp! Put this on a 35r or larger turbo’ed car that loves to pump a lot of volume and breathe up top and expect 1.5-2 times those gains! We’ve seen it with the DSM’s, and know this is possible.

So if you’re ready to step it up and make the most out of your current Evo mods, then consider swapping out that tiny restrictive intake manifold for a JMF sheet metal intake. It’s proven power!

Weight: 7.5 lbs
Height: 9 inch
Width: 16 inch

Warranty
This item carries a 1 year warranty against any material defects and a 3 year warranty against any weld defects. Any damage caused by a nitrous explosion or improper installation will void all warranties.

Video

Application List
* Mitsubishi Lancer Evolution 4
* Mitsubishi Lancer Evolution 5
* Mitsubishi Lancer Evolution 6
* Mitsubishi Lancer Evolution 7
* Mitsubishi Lancer Evolution 8
* Mitsubishi Lancer Evolution 9

JMF - Exhaust Turbo Manifold - Mitsubishi Lancer Evolution 4-9 - Twin Scroll - 1,258.73 AUD

Replace your restrictive OEM cast exhaust manifold with our high flowing tubular model. Made from thick walled 304 stainless steel tubing, this manifold is an exact replacement for the stock unit and no other modifications are required. Features near equal length runners with multi-pass TIG welded joints.

All flanges are CNC machined from 1/2" 304 stainless steel and surfaced to ensure a leak free seal. The ports are gasket matched and smoothed to perfection for the best of flow! Power gains can be expected throughout the entire RPM band.

Installation Tip
Move the studs in the turbine housing from the front holes to the rear holes for an easier installation.

Runner Material: 1.25 in. Schedule 10 304 Stainless Steel

Flange Material: 304 Stainless Steel

*** Lifetime warranty on cracking and welds ***

Video

Application List
* Mitsubishi Lancer Evolution 4
* Mitsubishi Lancer Evolution 5
* Mitsubishi Lancer Evolution 6
* Mitsubishi Lancer Evolution 7
* Mitsubishi Lancer Evolution 8
* Mitsubishi Lancer Evolution 9

JMF - Exhaust Turbo Manifold - Mitsubishi Lancer Evolution 4-9 - T3 Flange - 1,549.43 AUD

Introducing our EVO bottom mounted turbo, tubular T3 exhaust manifold. Made from thick walled 304 stainless steel tubing. Featuring multi-pass TIG welded joints and CNC machined 1/2" thick 304 stainless steel flanges. The ports are gasket matched and smoothed to perfection for the best of flow and each flange is surfaced for a leak free seal.

With this manifold you will still be able to keep a full size radiator, OEM radiator hose, and fans.

Also allows clearance for up to an S cover compressor housing.

Runner Material: 1.25 in. Schedule 10 304 Stainless Steel

Flange Material: 304 Stainless Steel

*** Lifetime warranty on cracking and welds ***

Video

Application List
* Mitsubishi Lancer Evolution 4
* Mitsubishi Lancer Evolution 5
* Mitsubishi Lancer Evolution 6
* Mitsubishi Lancer Evolution 7
* Mitsubishi Lancer Evolution 8
* Mitsubishi Lancer Evolution 9