Defi – Defi-Link Meter BF – Exhaust Temperature (60mm)
Defi-Link Meters are electronic gauges which are high response and refined design. Defi-Link Meters need to be connected to Defi-Link Control Unit II. Up to 7 gauges can be connected and controlled by one Control Unit II. The name of the connection system is Defi-Link System. These great looking BF gauges from Defi turn completely off with no visible lettering / needles when gauge is off. Defi-Link System allows gauges to be attached to Defi-Link Control Unit II with a single ''DAISY CHAIN'' type wiring system Defi-Link II Controller required*Gauge dials are invisible while the ignition switch is off. Once the ignition switch is turned on, a clear display appears with white LED illumination. A red emitting needle pointer increases visibility.* Gorgeous Opening mode and Ending mode:* Brightness can be adjusted. There are 10 stages of brightness, 5 stages in the daytime and 5 stages in the nighttime. The brightness decreases being * interlocked with the illumination switch on. The decrease in lights can be canceled* Driving data can be stored and can be replayed up to 3 minutes.* Double Warning function by a meter's LED lamp and a beep* If Defi-Link Indicator(sold separately) is connected, it blinks when any of connected meters' warning LED light* Defi-Link Indicators can be connected to each gauge. * Differential pressure between fuel pressure and turbo can be shown if both of fuel pressure meter and turbo meter are installed* Defi-Link Control Unit II is necessary to operate Defi-Link Meter BF. * Defi-Link Meter BF is applicable only for 12V vehicles.
Only logged in customers who have purchased this product may leave a review.
Defi – Defi-Link Meter BF – Water Temperature (60mm)
Autometer – Sport-Comp Vacuum/Boost Gauge – 30 In. Hg.-Vac/20 PSI (2-1/16″)
Autometer – Sport-Comp Water Temperature Gauge (2-1/16″)